High-quality exterior paint, made on the basis of 100% acrylic resins. It provides high opacity, low consumption and high resistance to adverse weather conditions. It spreads easily. Acrylic paint can be used to paint any type of new or old surface: plaster, concrete, plasterboard, wood and others, after proper preparation.

100% acrylic paint
Certified light-reflective material
Breathable, but does not let water through
Extremely low consumption
Excellent resistance to adverse weather conditions
High quality, fade-resistant colours
Surface drying time 30-60 min
Dilution with water 10%
Consumption 15-17m2/lt
Application by brush, roller, spray gun

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free of dust, grease or crumbling materials.
Acrylic building filler is used to fill holes and fill cracks.
Old surfaces covered with lean paints (with lime or adhesive paints) are primed.
New surfaces of plaster, concrete, brick and others, as well as filled surfaces, are primed.

APPLICATION
Before use, the product must be stirred thoroughly. Apply in two coats by brush, roller or spray gun. Dilute up to 10% with water. The product should not be applied at temperatures below 5C, above 35C and/or at relative humidity above 70%, or when there is a risk of rain or frost in the next 48 hours.
The applied layer is dry to the touch in 30-60 minutes. The next coat can be applied after 3-4 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Surfaces painted with Acrylan can be washed with water at the earliest three weeks after painting, using a soft sponge, and in case of stubborn stains using a neutral, colourless cleaning detergent.
Tools are cleaned immediately after use with water and, if necessary, washed with soap or cleaning detergent.