High-quality exterior paint, made from 100% acrylic resins. It provides high opacity, low consumption and high resistance to unfavourable atmospheric conditions. It spreads easily. Acrylic paint can be used to paint any type of new or old surface: plaster, concrete, plasterboard, wood and others, after proper preparation.

100% acrylic paint
Certified light-reflective material
Breathable, but does not let water through
Extremely low consumption
Excellent resistance to unfavourable atmospheric conditions
High quality, fade-resistant colours
Surface drying time 30-60 min
Dilution with water 10%
Consumption 15-17m2/lt
Application by brush, roller, spray gun

SURFACE PREPARATION
Surfaces must be clean, dry and smooth, free of dust, grease or crumbling materials.
To fill holes and fill cracks, use Acrylic building filler.
Old surfaces covered with lean paints (with lime or adhesive paints) should be primed.
New surfaces of plaster, concrete, brick and others, as well as filled surfaces, should be primed.

APPLICATION
Before use, the product must be stirred thoroughly. Apply in two coats by brush, roller or spray gun. Dilute up to 10% with water. Do not apply the product at temperatures below 5C, above 35C and/or at relative humidity above 70%, or when there is a risk of rain or frost in the next 48 hours.
The applied layer is dry to the touch in 30-60 minutes. The next coat can be applied after 3-4 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Surfaces painted with Acrylan may be washed with water no earlier than three weeks after painting, using a soft sponge, and in case of stubborn stains using a neutral, colourless cleaning agent.
Tools should be cleaned immediately after use with water and, if necessary, washed with soap or a cleaning agent.